2.0 GETTING STARTED CHECKLIST
2.1 Included with the PQ100
1. PQ100 Main Unit
2. PQ101 Battery Charger (120 VAC or 240 VAC)
3. CQ2 PC Communication Adapter Cable
4. PC Software Diskettes - 3 2", 1.44K
5. PQMAN Manual
6. PQ102 Hose Adapter
2.2 Optional Accessories Available (See Section 5)
1. PQ103 Replacement Battery
2. CQ3 External Battery Adapter Cable
3. SSI-10 Size Selective Inlet (SSI) Kit
4. TP100R Dicot Inlet Rigid Tripod Assembly
5. F20 47mm Filter Holder for BGI16.7
6. F21 Filter Cassette (for use with F20 above)
7. TSP CAP Total Suspended Particulate Inlet
2.3 User Supplied Items
1. A DeltaCal, TetraCal (formally triCal) or Bubble Meter/Calibrator.
Note: Dry Calibrators and Rotameters are not recommended!
2. A length of rubber hose (about a half meter).
3. A Pinch Clamp or Valve (helpful but not required).
4. Ambient Temperature and Local Barometric Pressure Readings.
5. A Magnehelic Pressure Gauge (helpful but not required).
6. Filter Holder (F20) with Filter Cassettes (F21/2) to collect sample (also protects
the PQ100 from damage).
Note: Permanent damage can occur if the PQ100 is operated without a filter in series with the
Inlet. If the unit is operated without a SSI head with filter and holder, a suitable filter must be
used to prevent damage to the pump and sensors.
To Next Page
Loading...
Need help?
General