Biddle CA2 - Page 5

MANUAL INTRODUCTION
Version: 6.1 (05-12-2011) 5
1.3.1 Symbols used in the manual
The following symbols are used in this manual:
Note:
n Draws your attention to an important part of the text.
Read this part of the text thoroughly.
Caution:
c If you do not perform this procedure or action correctly,
you may damage the device.
Follow the instructions strictly.
Warning:
w If you do not perform this procedure or action
correctly, you may cause damage and/or bodily
injury.
Follow the instructions strictly.
Danger:
d This indicates actions which are not permitted.
Ignoring this warning may lead to serious damage
or accidents which may involve bodily injury.
The action may be carried out only by qualified
staff perf
orming maintenance or repair works.
1.3.2 Pictograms on the unit and in the manual
The pictograms in Table 1-1 warn of potential risks and/or
dangers. The pictograms can be found opposite the text
discus
sing risk-entailing operations. The same pictograms will
also be found on the unit.
Table 1-1 Picto
grams
P
ICTOGRAM DESCRIPTION
ê
Warning: You are entering an area of the unit containing ‘live’ components.
Accessible to qualified maintenance staff only.
Exercise caution.
ç
Warning: This surface or part can be hot. There is a risk of burns on
contact.