Manual version 4.1 (26-07-2018)
en-13
en
2. . Installation
w Installation activities may only be performed
by technical staff qualified for this purpose.
w Before starting installation: read the safety
instructions.
See also:
1.5 "Safety instructions" on page 11
2.1 Inspection on delivery
• Check the unit and the packaging to ensure that they have
been delivered in good order. Notify the driver and
the
sup
plier immediately if any shipping damage is detected.
• Ensure that all components are present. Notify supplier of
any missing parts immediately.
See also:
1.4 "Components and accessories" on page 10
2.2 Hanging the unit up
2.2.1 Determining the location of the unit
• Make sure that the structure from which the unit is about
to be suspended can bear at least 4 times the weight of th
e
unit. The un
it’s weight is indicated on its type plate.
• The distance between the floor and the unit’s undersid
e
m
ust be more than 2.7 m due to the accessibility of th
e
in
spection hatch.
• Make sure that the electronics and the pressure meters on
the unit’s long side remain easily accessible.
For this, keep 50 cm of space free on the side of the elec-
tronics box.
To Next Page
Loading...