Biddle HR 25 - Configuration

HR MANUAL OPERATION VIA B-TOUCH
Manual version 4.1 (26-07-2018)
en-43
en
Warning:
w Be aware that the airflow of the unit can set
objects in motion. This might set off an alarm
system in the building at night time.
9. Cal
ibration Adjust the temperature reading if this deviates from the actual
temperature.
3.6 Configuration
The menu Configuration allows you to enter settings in order
to adjust the operation of the unit to the room and the sys-
tem. Usually, this menu is used only for installation, mainte-
nance and service purposes.
20. A
ccess control Pin code
Access to the entire control panel or to the menu only can be
protected with a four-digit PIN code.
The default PIN code is 0000.
Access level
The control panel can be safeguarded at different access levels.
21. U
ser interface options Display on/off button
The unit can be switched ON and OFF manually. This can also
be done via the internal timer or via an external release signal
on the unit. In this case you can disable the manual on/off
option. The on/off button is then not displayed on the Home
screen.
Temperature display
By default, the room temperature (exhaust air) is displayed.
With this function, you can select another temperature to dis-
play or switch off the temperature display.
If the temperature display is switched off, there is no tempera-
ture control.
Temperature control OFF option
Use this function to enable or disable the option for the user
to switch the temperature controlON/OFF manually.