Biddle HR 25 - Page 3

HR MANUAL
Manual version 4.1 (26-07-2018)
en-3
en
6 Maintenance 64
6.1 Introduction 64
6.2 Replacing the filter 64
6.3 Cleaning the unit 65
6.4 Scheduled maintenance 65
7 Service 66
7.1 Cleaning the plate heat exchangers 66
7.2 Removing the control circuit board 68
7.3 Connecting the control circuit board 68
7.4 Fuses 69
7.5 Setting the unit code 69
7.6 Resetting the PIN code 70
7.7 Copying the settings 71
7.8 Updating the software 72
7.9 Composition of the Biddle control cable 74
8 Dismantling 75
9 Addresses 76
Keywords 77