BIGTREETECH KRAKEN V1.0

BIGTREETECH Kraken V1.0 User Manual
27
#define NOZZLE_PARK_FEATURE // park nozzle
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
// set the X, Y and Z offset coordinate of the nozzle
#define ADVANCED_PAUSE_FEATURE // retraction setting of nozzle park
movement and filament purge distance after the print is resumed.
Compile Firmware
1. Click "√" to compile firmware.
2.
Copy the compiled "firmware.bin" to SD card and insert to motherboard to
update firmware.