BIGTREETECH KRAKEN V1.0

BIGTREETECH Kraken V1.0 User Manual
21
100K NTC or PT1000
In Marlin firmware, "1" represents a 100K NTC with a 4.7K pull-up resistor.
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 1
#define TEMP_SENSOR_BED 1
BLTouch
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Do not remap the
Z_PROBE_PIN to the Z_MIN port.
#define BLTOUCH // Enable BLTouch