BIGTREETECH KRAKEN V1.0

BIGTREETECH Kraken V1.0 User Manual
7
CANx2, PT100/PT1000x2, USB-A 5V Power, Endstop
Portx8, etc.
Motor Drivers
Onboard TMC2160, support 24-60V, Max 8A driving
current for S1
-S4(Rsense=22mR),
Max 3A for S5
-S8(Rsense=75mR)
Driver Modes
SPI
Motor Interfaces
S1, S2, S3, S4, S5, S6, S7, S8
Temp Sensor Interfaces
5x 100K NTC, 2x MAX31865
Display
LCD
PC Communication
Type-C
Supported Kinematics
Cartesian, Delta, Kossel, Ultimaker, CoreXY
Recommended
Slicer/Console
Cura, Simplify3D, Pronterface, Repetier-host,
Makerware
Dimensions
200 x 113mm
Mounting Dimensions
for details please refer to BIGTREETECH Kraken
V1.0
-SIZE.png
Firmware Support
Compatible with Klipper, Marlin, RRF(RepRapFirmware)