Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
30 / 35
Configure the Motherboard
SSH Connect to Device
1. Install the ssh application Mobaxterm:
https://mobaxterm.mobatek.net/download-home-edition.html
2. Insert MicroSD card to MANTA M5P, and wait for the system to load after
power on, approx. 1-2min.
3. The device will automatically be assigned an IP address after successfully
connecting to the network.
4. Find the device IP address on your router page.
5. Or use the https://angryip.org/ tool, scan all IP addresses in the current
network organize by names, and find the IP named Fluidd, Mainsail (CM4), or
BTT-CB1 (CB1), like shown below.
To Next Page
Loading...
Need help?
General
