Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
34 / 35
Configure Klipper
1. Enter your device IP address into your browser, and find the reference
config for the motherboard in the directory shown below, if there is no such
config available, update your Klipper source code to the newest version or
download it from GitHub: https://github.com/bigtreetech/Manta-M8P.
2. Upload your finished config file into Configuration Files, and rename it to
"printer.cfg".
3. Enter the correct ID.
Follow the instructions https://www.klipper3d.org/Overview.html to configure
the specific functions of the machine.
To Next Page
Loading...
Need help?
General
