Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
12 / 35
UART Mode of TMC Driver
e.g.: TMC2208, TMC2209, TMC2225, etc., place jumpers according to the
diagram below, microstep and current can be configured in firmware.
TMC Driver SPI Mode
e.g.: TMC2130, TMC5160, TMC5161, etc., place jumpers according to the
diagram below, microstep and current can be configured in firmware.
TMC Driver DIAG (Sensorless Homing)
When using sensorless homing, place jumpers according to the diagram below,
there is no need to cut the DIAG pin off when not being used.
To Next Page
Loading...
Need help?
General
