Shenzhen Big Tree Technology CO.,LTD .
BIG TREE TECH
34 / 39
5.3 WIFI setting
note：skip this step if you are using ethernet port not using WIFI
1. Reinsert the SD card
2. Find“fluiddpi-wpa-supplicant.txt”or “mainsail-wpa-supplicant.txt”in the
SD card root directory, open it with VSCode (do not open it with windows
notepad)
3. delete‘#’,insert the correct wifi SSID and password then save the file，
5.4 ssh connect to raspberry pi
1. Install the ssh application Mobaxterm：https://mobaxterm.mobatek.net/download-
home-edition.html
2. Insert SD card to raspberry pi，wait for system to load after power one，
aprox. 1-2min
3. The raspberry pi will automatically be assigned a IP address after
successfully connected to the network
4. Find the raspberry pi IP address in your router page
To Next Page
Loading...
