Shenzhen Big Tree Technology CO.,LTD .
BIG TREE TECH
37 / 39
5.6 Configure Klipper
1. Enter your raspberry pi IP address into your browser to open the webUI，
find the reference config for motherboard in the directory shown below，if
there is no such config available, update your klipper source code to the
newest version or download from github:https://github.com/bigtreetech/SKR-3
2. Upload your finished config file into Configuration Files, and rename to
“printer.cfg”
3. Insert the correct motherboad ID
4. Refer to https://www.klipper3d.org/Overview.html for detailed
configuration guide according to your machine type.
To Next Page
Loading...
