RFC 1483 Routed
Description: User-denable name for the connection.
VPI / VCI: Enter the information provided by your ISP.
ATM Class: Select thehe Quality of Service for ATM layer.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet
through a single IP account by sharing the single IP address. If users on your LAN have their own
public IP addresses for accessing Internet directly, the NAT function can be disabled.
Encapsulation method: Select the encapsulation format, the default is LLC Bridged. Select the
one provided by your ISP.
IP Assignment:
Obtain an IP address automatically via DHCP client: Specify if the Router can get an IP
address from the ISP (Internet Service Provider) automatically.
Use the following IP Address: Specify the IP address manually; the IP should be given by
you our ISP.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specic
headers) that IP will attempt to send through the interface.
TCP MSS Clamp: This option helps to auto detect the optimal MTU size. Default is enabled.
58
To Next Page
Loading...
Need help?
General
