63
IPoA Routed
Description: User-denable name for the connection.
VPI / VCI: Enter the information provided by your ISP.
ATM Class: Select thehe Quality of Service for ATM layer.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet
through a single IP account, sharing a single IP address. If users on your LAN have public IP
addresses and can access the Internet directly, the NAT function can be disabled.
IP Assignment:
• Obtain an IP address automatically via DHCP client: Specify if the Router can get an IP
address from the ISP (Internet Service Provider) automatically.
• Use the following IP Address: Specify the IP address manually; the IP should be given by
you our ISP.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specic
headers) that IP will attempt to send through the interface.
Obtain DNS: A Domain Name System (DNS) contains a mapping table for domain name and IP
addresses. DNS helps to nd the IP address for the specic domain name. Check the checkbox
to obtain DNS automatically.
Primary DNS: Enter the primary DNS.
Secondary DNS: Enter the secondary DNS.
Click Apply to conrm the settings.
To Next Page
Loading...
Need help?
General
