CB (E6.1) 07/2017 Page 34/145
4.5 Electrical connection
The chambers are supplied ready for connection. They come with an IEC connector plug.
Model (including
chambers with O
2
control and/or
divided inner door)
Art. No.
(x = 0 or 1)
Power plug
Voltage
+/-10 %
Power
frequency
Chamber
fuse
CB 60
9x40-0088
9x40-0090
Shock-proof plug 200-240 V (1N~) 50/60 Hz 10 A
CB 60-UL
9x40-0089
9x40-0091
NEMA 5-15P 100-120 V (1N~) 50/60 Hz 16 A
CB 160
9x40-0092
9x40-0100
9x40-0094
9x40-0102
Shock-proof plug 200-240 V (1N~) 50/60 Hz 10 A
CB 160-UL
9x40-0093
9x40-0101
9x40-0095
9x40-0103
NEMA 5-20P 100-120 V (1N~) 50/60 Hz 16 A
CB 220
9x40-0096
9x40-0108
9x40-0098
9x40-0110
Shock-proof plug 200-240 V (1N~) 50/60 Hz 10 A
CB 220-UL
9x40-0097
9x40-0109
9x40-0099
9x40-0111
NEMA 5-20P 100-120 V (1N~) 50/60 Hz 16 A
• The domestic socket must also provide a protective conductor. Make sure that the connection of the
protective conductor of the domestic installations to the chamber’s protective conductor meets the
latest technology. The protective conductors of the socket and plug must be compatible!
• Prior to connection and start-up, check the power supply voltage. Compare the values to the specified
data located on the chamber’s type plate (left chamber side, bottom right-hand, see chap. 1.4). We
recommend the use of a residual current circuit breaker.
• When connecting, please observe the regulations specified by the local electricity supply company as
well as the VDE directives (for Germany).
• Pollution degree (acc. to IEC 61010-1): 2
• Over-voltage category (acc. to IEC 61010-1): II
CAUTION
Danger of incorrect power supply voltage.
Damage to the equipment.
Check the power supply voltage before connection and start-up.
Compare the power supply voltage with the data indicated on the type plate.
See also electrical data (chap. 22.4).
To Next Page
Loading...
