Binder CB 60-UL - Page 79

CB (E6.1) 07/2017 Page 79/145
Temperature
First you can enter the desired value of the temperature tolerance range:
Enter tolerance range
08.03.2013 05:05:06
Entry menu “Temperature”.
Enter the desired value of the temperature tolerance
range with the operating button.
Setting range: 0 up to infinite
Press the “Ok” button to confirm.
..\ Tolerance ranges \ Temperature
1
.0 [°C]
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home
When entering a value outside the setting range, the message “invalid value” appears. Press the
operating button to confirm with “Ok” and repeat the entry with a correct value.
Then you can enter the delay time for the temperature tolerance range alarm:
Enter alarm delay [min]
08.03.2013 05:05:06
Entry menu “Temperature alarm delay”
Enter the desired delay time in minutes with the
operating button.
Setting range: 0 up to infinite
Press the “Ok” button to confirm.
..\ Temperature alarm delay
1
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home
When entering a value outside the setting range, the message “invalid value” appears. Press the
operating button to confirm with “Ok” and repeat the entry with a correct value.
CO
2
First you can enter the desired value of the CO
2
tolerance range:
Enter tolerance range
08.03.2013 05:05:06
Entry menu “CO2”.
Enter the desired value of the CO
2
tolerance range
with the operating button.
Setting range: 0 vol.-% up to 100 vol.-%
Press the “Ok” button to confirm.
..\ Tolerance ranges \ CO2
1
.0 [Vol.-%]
1
Pos1 End Ok 0 2 3 4 5 6 7 8 9
Close Ok Home
When entering a value outside the setting range, the message “invalid value” appears. Press the
operating button to confirm with “Ok” and repeat the entry with a correct value.