biochrom Anthos Fluido 2 - Aspiration Power Entry; Dispense Volume Entry; Dispenser Power Selection

Biochrom Anthos Fluido-2 Microplate Washer v2.0 Page 49
Screen
46.
Aspiration Power Entry
 Function keys:
<F1> or <F2>
Select "Esc" to return to the main menu without saving any changes or
"<<" to return to the previous screen.
<+> or <->
Use these keys to change the power with which the liquid is aspirated
off a well (“Low”, “Medium”, “High”).
<enter>
Confirm the selection of the aspiration power and go to the next
screen.
Screen
47.
Dispense Volume Entry
 Function keys:
<F1> or <F2>
Select "Esc" to return to the main menu without saving any changes or
"<<" to return to the previous screen.
<+> or <->
Use these keys to change the dispense volume for this cycle in steps of
50µl (range 0 - 2000µl).
<enter>
Confirm the selection of the volume and go to the next screen.
Screen
48.
Dispenser Power Selection
Aspir power:
<< Esc High
Disp volume:
<< Esc 1000 µl
Disp power:
<< Esc High