User’s Manual of LifePro Thermal Cycler Connection to computer
－30－
One device can only connect to one computer.
Disconnect
Select device not connected, click Disconnect menu.
Calculate gradient
y Select gradient menu.
y Input gradient initial point and gradient value.
y Select 8*12 (96 holes) as calculation module type.
y Click Calc.
Change device IP and device name
y Select Server Setting item under Tool menu to bounce the dialog box for setting.
y Click Add to add line.
y Click Delete to delete current line.
y Fill in IP address and alias, click Save to save setting.
Prompt
y The setting comes into valid only after software restart.
y IP setting must match the device.
To Next Page
Loading...
