LifePro Thermal Cycler Features
－4－
Caution: If the hot-lid temperature setting is lower than module temperature setting, the hot-lid
temperature shown on screen is higher than hot-lid setting.
4. Software functions
a) Edit the file (including file number, temperature and time of each segment, cycle times setting,
file view, revision and deletion, automatic file connection, gradient temperature setting, the
maximum paragraph, step and cycle times for editable file are 5, 16 and 99 respectively. The
scope for gradient temperature setting is 1°C～30°C.)
b) Save the file
c) Revise the file (adjust the rate for temperature rise/fall, refine temperature and time for cycling
automatically, and display and calibrate the time.)
d) Display the temperature, time, cycle times setting and real-time value at file running (including
sound prompt, total/rest time estimation for file running, failure protection and alarming.)
e) Stop the file running (including pause the file running, stop the file running, recover
automatically after power off.)
Caution: The above-mentioned software function is merely for reference. The software
function would be modified without notice.
To Next Page
Loading...
