E80/E70 Digital Electrocardiograph User’s Manual
4-5
——Select【Replay】: Replay freeze waveform.
——Select【Pause】: A pause in waveform replay.
——Select【More】: Store, record, print the waveform and set record format.
Shown as Fig. 4-3
In the interface Fig. 4-3, you may conduct the following operations:
——Select【Return】: Return to interface shown as Fig. 4-2
——Select【Report format】: Set report format recorded to output, shown as
Fig. 4-4.
——Select【 Store】 : Analyze the frozen waveform, and store result to
appointing position.
——Select【Record】: Record and output current ECG report immediately.
——Select 【 Print 】 (Optional): Print and output current ECG report
immediately.
——Select【Pdf】 (Optional) : Transfer current ECG report to save as a Pdf
file.
Caution:
The optional external USB printer need the support of the printer
language of PCL5 or PCL6.
The report printed by the USB printer may exists the circumstance of
inaccurate time scale plate due to different printer.
The transferred ECG report as a pdf can only be browsed through
computer screen, it can not be seen directly on the
Electrocardiograph.
4.4 File Management
4.4.1 File Management Interface
Electrocardiograph can store and manage more than 300 shares of patient
data. It can review, edit, record, delete or transmit patient data in file
management window. Data stored contains ECG waveform in xml format;
analyze conclusion and ECG report with patient info.
Press 【File/F6】 in main interface to enter file management interface.
Shown as follows:
To Next Page
Loading...