E80/E70 Digital Electrocardiograph User’s Manual
7-2
panel.
Do not use abrasive material including wire brush or metal brightener
during cleaning because this material will damage the panel and
electrocardiograph screen.
Do not submerge the electrocardiograph in liquid.
While cable or plug of attachment accidentally gets wet, please rinse it
with distilled water or deionized water and dry it in the environment of
temperature 40℃ to 80℃ for at least one hour.
Caution:
Avoid high temperature.
Avoid sunshine, dust or bump, and avoid shaking acutely while
moving.
7.3 Cleaning and Sterilizing of Accessories
1． ECG cable
a) Please clean cable before disinfection.
b) Clean the surface of cable by use of soft cloth dipped with appropriate
quantity of clean water or neutral soap water;
c) Dip soft cloth with appropriate quantity of disinfector, and wipe the
cable;
d) Clean the residual disinfector on cable by use of soft cloth dipped with
clean water;
e) Air dries the cable at a shady and cool place.
Caution:
It is necessary to regularly check the cable and lead wire of the
patient to ensure their completeness and good conduction;
Damaged or aging cable or wire shall be replaced timely;
In the course of use, tidy up the lead wire as much as possible, and do
not pull it forcibly.
To Next Page
Loading...