Patient Monitor User’s Manual
3-3
choose the low level brightness to save power.
Caution: If the monitor is used outdoors or the ambient
light is strong, set the screen brightness to a
higher level.
3.5 Auto-Rotate Setting
【Menu】→【 System】，click the right of 【Auto-rotate】
to select 【On】 or 【Off】. If you select 【On】, the screen
can react to the gravity. When the monitor rotates, the screen
will rotate the display direction automatically.
3.6 Date & Time Setting
After starting up, you need to set date and time of this
monitor. Operations are as follows:
1. Select【Menu】→【System】to enter the System menu shown
as follows:
2. Select 【Date Format】, it can be set to【Year/Month/Day】,
【Month/Day/Year】or【Day/Month/Year】.
3. Select【Time Format】, it can be set to【24h】or【12h】.
4. Set the current date and time and select【OK】to confirm it.
To Next Page
