Patient Monitor User’s Manual
3-4
3.7 Patient Information Setting
Caution: The alarm limits of different parameters
depend on the patient type. If you set patient
type incorrectly, the monitor will judge patient
condition by current setting, which might be
wrong for your patient.
Please select patient information correctly before
measuring, Click 【ID】 on the left bottom of main screen to
enter into 【Patient Info.】. You also can select 【Menu】→
【System】→【Patient Info.】. Setting shown as follow:
1. Click the right of 【ID】to set it values.
2. Set【Type】to【Adult】,【Pediatric】or【Neonate】.
3. Select 【Pace】to 【Ye s】when patient with pacemaker.
3.8 Demo Mode Setting
To enter the demo mode:
Select 【Menu】→【System】→【Maintenance】→enter
the required password. Click the right of 【Demo】to turn on.
To exit the demo mode:
To Next Page
Loading...