Patient Monitor User’s Manual
10-5
10.4 Cleaning ECG Cable
The recommended disinfectors include glutaric dialdehyde
solution and 10% decolourant solution.
a) Please clean cable prior to sterilization.
b) Clean the cable surface with soft cloth bedewed with some
fresh water or neutral soapy water.
c) Scrub cable with soft cloth bedewed with some disinfector.
d) Wipe off the disinfector remaining on cable by soft cloth
bedewed with fresh water.
e) Put cable in a shady and cool environment for airing.
Attention:
z Do not sterilize lead wire with high-pressure, radioactive
or steam device.
z Do not directly submerge lead wire in liquid.
z To avoid long-time harm to cable, it is suggested that
sterilization to the product be conducted only when
necessary according to the regulation of your hospital.
z Do not clean and reuse disposable electrode.
To Next Page
Loading...
