Patient Monitor User’s Manual
3-5
Select 【Menu】→【 System】→【 Maintenance】→ enter the
required password. Click the right of 【Demo】to turn off.
Caution: The Demo mode is for demonstration purpose
only. To avoid that the simulated data are
mistaken for the monitored patient’s data, you
should not enter the Demo mode during a
patient is being monitored. Otherwise, improper
patient monitoring and delayed treatment could
result.
3.9 Language Setting
Select 【Menu】→【 System】→【 Maintenance】, enter the
required password. On 【Factory Mainten.】interface, you can
select 【Language】and then choose a desired language.
3.10 Checking the Version
Select【Menu】→【System】to check the version of the
monitor software.
To Next Page
