Biolight Meditech M850 - Appendix B Factory Defaults; B.1 Alarm Setup; B.2 System Setup

Patient Monitor User’s Manual
12
Appendix B Factory Defaults
This section lists the most important factory default settings.
These settings can be adjusted and you can load the factory
defaults if you need.
B.1 Alarm Setup
Alarm Setup Factory Default
Alarm volume Medium
Minimum alarm
volume
Low
SpO
2
Alarm Level Medium
HR Alarm Level Medium
RESP Alarm Level Medium
B.2 System Setup
System setup Factory Default
QRS volume medium
Brightness 3
Scan speed 12.5mm/s