Patient Monitor User’s Manual
10-6
10.5 Cleaning SpO2 Sensor
1. The casing of the sensor and light tube can be cleaned with
swab or non-velvet soft cloth dipped with medical alcohol.
2. The sensor cable can be cleaned or sterilized with Hydrogen
Peroxide 3% or isopropyl alcohol 70%.
3. It is forbidden to put the monitor in high-pressure containers
and put the sensor directly in liquid.
Warning: Do not reuse or disinfect the disposable SpO2
sensor.
10.6 Disposal
Dispose of the monitor in accordance with local
environment and waste disposal laws and regulations. For the
disposal of SpO2 sensor and ECG cable, follow local regulations
regarding disposal of hospital waste.
0
To Next Page
Loading...