Patient Monitor User’s Manual
10-4
10.3 Cleaning the Monitor
1. Common detergent and non-corrosive disinfectant used in
hospital can be applied to clean monitor, however you must
be aware that many kinds of detergents must be diluted prior
to utilization, and please use it according to the instruction of
detergent manufacturer.
2. Avoid the use of alcohols, amino or acetonyl detergent.
3. The enclosure and screen of monitor shall be free of dust, and
they can be wiped with lint-free soft cloth or sponge soaked
in detergent. While cleaning, be careful and do not spill
liquid onto the instrument and keep any liquid out of it. When
wiping the side panel of monitor, you must be especially
careful to keep water out of all kinds of cable and outlet on
the panel.
4. Do not use abrasive material including wire brush or metal
brightener during cleaning because this material will damage
the panel and monitor screen.
5. Do not submerge the monitor in liquid.
6. While cable or plug of attachment accidentally gets wet,
please rinse it with distilled water or deionized water and
dry it in the environment of temperature 40℃ to 80℃ for at
least one hour.
To Next Page
Loading...
