Biolight Meditech M850 - Page 59

Patient Monitor User’s Manual
6-5
Select scan speed of Resp waveform. Click the right of
【Speed】, you can select “6.25 mm/s,12.5mm/s, 25 mm/s”.
6.4.4  GainSetup
Select gain of Resp waveform. Click the right of【Gain】,
you can select “x0.25 ,x1,x2”.
6.4.5  Resp Lead Setup
Select computing method of Resp lead. Click the right of
【Resp Lead】, you can select “RA-LA，RA-LL”.
6.4.6  ApneaAlarmSetup
Suffocation alarm occurs when the time of zero Resp rate
has reached this time scale. Click the right of 【Apnea Alarm】,
you can select “Off, 5s, 10s, 20s, 40s, 60s, 80s, 100s, 120s”.
6.4.7  Resp AntiDriftSetup
Click the right of 【Resp Anti-Drift】, you can turn on or
turn off this function.