BIONIME RIGHTEST - Page 8

13
Safety Information
12
Safety Information
Do NOT Use If It Could Fall into Water. Do not spill liquids on receiver or submerge it in
water or other liquids. If the receiver has fallen into water, do not touch it until you unplug it
from any electrical outlet. Touching the receiver while it is wet could result in electric shock or
no glucose results.
DO NOT Use If Any Component Appears to be Damaged. A damaged or cracked inserter,
sensor, transmitter, or receiver could compromise the integrity of the system or contribute to
infection risk.
Traveling by Air. Always check and follow flight rules or regulations before departure. Notify
the security personnel of the presence of the RIGHTEST CGMs and ask for pat-downs,
visual inspection, and walk through metal detectors. You must comply any requests by
airline personnel (e.g. turning off the system). Don’t pass through an advanced imaging
technology (AIT) body scanner (e.g. millimeter wave scanners) or put RIGHTEST
CGMs components through x-ray machines since the effects of these equipment are not
evaluated.
Not Allowed to Changing Time Zone. You are not allowed to change time zone during the
14-day of monitoring. Changing the time or date settings in the period of monitoring may
result in gaps in the graph or hidden glucose readings.
Keep an Emergency Kit with You. Make sure necessary supplies are always available. Let
your family, co-worker, or friend know where the emergency kit is. The emergency kit should
contain:
• Fast-acting glucose tablets.
• Blood glucose monitoring supplies.
• Insulin syringe and rapid-acting insulin (with dosage instructions from your healthcare
professional).
• Adhesive dressing.
• Glucagon™ emergency kit.
Trouble Shooting If any situation not mentioned in this user manual happens, please contact
your healthcare professional or Customer Service.
Be Careful of Electromagnetic Disturbance. Stacking or collocating equipment, or using AC
power adapter, USB cable and USB charger not provided with RIGHTEST CGMs may bring
negative influence on electromagnetic compatibility. Stay a distance no closer than 30 cm
(12 inches) to any part of any portable RF communications equipmentand at least 1 meter
for sensitive equipment. If abnormal behavior is observed due to EM disturbances, please
relocate the device accordingly.