BIXOLON SRP-350plusIII Driver Manual

SRP-350plusIII
Rev. 1.02
- 28 -
5-3 NV Image/Commands
1) Open the Printer Properties window for the corresponding OS.
2) In the General tab, click Preferences.
3) Click the NV Image / Command.
NV image downloaded and stored in the printer can be inserted at the beginning and/or
end of the document and beginning and end of each page, or printer command can be
inserted before sending printer data to the printer. NV image can be downloaded using the
Unified POS Utility.
- Start Doc
:
Insert commands or NV image at the top of the document.
- Start Page
:
Insert commands or NV image at the top of the page.
- End Page
:
Insert commands or NV image at the end of the page.
- End Doc
:
Insert commands or NV image at the end of the document.

BIXOLON SRP-350plusIII Specifications

General

Type	POS printer
Character size	24 x 24 mm
Print technology	Direct thermal
Maximum resolution	180 x 180 DPI
Product color	Gray
Maximum roll diameter	83 mm
Supported paper width	80/58 mm
Maximum printing width	72 mm
Printing media thickness	50 - 80 µm
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %
USB port	Yes
Serial interface type	RS-232
USB 2.0 ports quantity	1
Connectivity technology	Wired
Wi-Fi	No
Built-in barcodes	1D, 2D, CODABAR (NW-7), Code 39, Code 93, Code-128 Codabar Library, Data Matrix, EAN13, EAN8, ITF, ITF-14, ITF-25, Micro QR Code, QR Code, UPC-A, UPC-E
Autocutter durability	1.8 million cuts
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	146 mm
Width	145 mm
Height	204 mm