BIXOLON SRP-350plusIII Driver Manual

SRP-350plusIII
Rev. 1.02
- 39 -
5-7 Bidirectional Communication
1) Open the Printer Properties window for the corresponding OS.
2) Click Ports tab.
Because “bidirectional support” is disabled by default, it is necessary to tick Enable
bidirectional support to get status from the printer. Sample codes contained in the CD
can help you get more status information than the status information that OS supplies as
standard way. This windows driver supports only one-on-one communication between the
printer and host (typically a PC).
Printer status available to check:
- COVER OPEN/CLOSE
- PAPER EMPTY
- NEAR END PAPER
- CASH DRAWER OPEN/CLOSE

BIXOLON SRP-350plusIII Specifications

General

Type	POS printer
Character size	24 x 24 mm
Print technology	Direct thermal
Maximum resolution	180 x 180 DPI
Product color	Gray
Maximum roll diameter	83 mm
Supported paper width	80/58 mm
Maximum printing width	72 mm
Printing media thickness	50 - 80 µm
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %
USB port	Yes
Serial interface type	RS-232
USB 2.0 ports quantity	1
Connectivity technology	Wired
Wi-Fi	No
Built-in barcodes	1D, 2D, CODABAR (NW-7), Code 39, Code 93, Code-128 Codabar Library, Data Matrix, EAN13, EAN8, ITF, ITF-14, ITF-25, Micro QR Code, QR Code, UPC-A, UPC-E
Autocutter durability	1.8 million cuts
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	146 mm
Width	145 mm
Height	204 mm