Configures the frequency or period of the waveform.
Configures the amplitude or the high level of the waveform.
Configures the DC offset or the low level of the waveform.
Configures the phase or set equal phase relative to the other
channel.
Configures the duty cycle of the waveform.
Configures the frequency or period of the waveform.
Configures the amplitude or the high level of the waveform.
Configures the DC offset or the low level of the waveform.
Configures the phase or set equal phase relative to the other
channel.
Configures the symmetry of the waveform.
Configures the frequency or period of the waveform.
Configures the amplitude or the high level of the waveform.
Configures the DC offset or the low level of the waveform.
Configures the pulse width or the duty cycle of the pulse.
Configures the delay of the pulse waveform.
Configures the standard deviation of the noise waveform.
Configures the mean value of the noise waveform.
Configures the frequency or period of the waveform.
Configures the amplitude or the high level of the waveform.
Configures the DC offset or the low level of the waveform.
Configures the phase or set equal phase relative to the other
channel.
Built-In – Access selectable built-in waveforms for output.
Stored Wforms – Access arbitrary waveforms stored in
internal memory for output.
Depth/DSB
Freq/Key
Freq/FM
Freq/FM
Dev/PM
Freq/Phase
Dev/PWM
Freq/Width
Configures parameters for AM, FM, PM, ASK, FSK, DSB-
Configures the type of modulation.
Configures the modulating waveform shape.
Selects modulating source.
Configures the sweep time for sweep output.
To Next Page
Loading...
Need help?
General
