BK Precision 9205 User Manual

32
Standard event status register
Bit
Decimal
Value
Definition
0
OPC
1
Operation Complete. All commands prior to and including
an *OPC command have been executed.
1
Not used
0
Always set to 0.
2
QYE
4
Query Error. The power supply tried to read the output
buffer but it was empty. Or, new command line was
received before a previous query had been read. Or, both
the input and output buffers are full.
3
DDE
8
Device Error. A self-test or calibration error occurred (see
error numbers 601 through 750 in chapter 5).
4
EXE
16
Execution Error. An execution error occurred (see error
numbers -211 through -224 in chapter 5).
5
CME
32
Command Error. A command syntax error occurred (see
error numbers -101 through -178 in chapter 5).
6
Not used
0
Always set to 0.
7
PON
128
Power On. Power has been turned off and on since the
last time the event register was read or cleared
Query status register
Bit
Decimal
Value
Definition
0
Voltage
1
The power supply is/was in the constant current
mode.
1
Current
2
The power supply is/was in the constant voltage
mode.
2-3
Not used
0
Always set to 0.
4
Overtemperature
16
The fan has a fault condition.
5-8
Not used
0
Always set to 0.
9
Overvoltage
512
The overvoltage protection circuit has tripped.
10
Overcurrent
1024
The overcurrent protection circuit has tripped.
11-15
Not used
0
Always set to 0.
Status byte register
Bit
Decimal
Value
Definition
0-2
Not used
0
Always set to 0.
3
QUES
8
One or more bits are set in the questionable status
register (bits must be “enabled” in the enable register).
w ww . . co m
information@itm.com1.800.561.8187

BK Precision 9205 Specifications

General

Brand	BK Precision
Model	9205
Category	Power Supply
Language	English