Black Box LPB2810A User Manual

724-746-5500 | blackbox.com
Page 168
724-746-5500 | blackbox.com
Chapter 3: Configuration
3.24 SMTP Configuration
When the switch perceives an alarm, use this function to enable the SMTP server to send you an alarm e-mail.
Web Interface
To configure the SMTP Configuration in the Web interface:
1. Click Configuration, SMTP Configuration.
2. Scroll to select the Severity Level.
3. Specify the parameters in each blank field.
4. Click the Save button to save the setting.
5. Click Reset to undo any changes made locally and revert to previously saved values
Figure 3-97. The SMTP Configuration screen
Parameter Description
These parameters are displayed on the SMTP Configuration page:
• Mail Server: Specify the IP Address of the server transferring your e-mail.
• Username: Specify the username on the mail server.
• Password: Specify the password on the mail server.
• Sender: To set the mail sender name.
• Return-Path: To set the mail return-path as sender mail address.
• Email Address 1–6: Email address where you would like to receive the alarm message.
• Buttons:
- Save: Click to save changes.
- Reset: Click to undo any changes made locally and revert to previously saved values.
LPB2810A

Black Box LPB2810A Specifications

General

Brand	Black Box
Model	LPB2810A
Category	Switch
Language	English