724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 35
Chapter 2: System Configuration
2.6.4 Groups
This function is used to configure SNMPv3 group. The Entry index keys are Security Model and Security Name. To create a new
group account, please check <Add new group> button, and enter the group information then check <Save>. The Maximum
Group Number : v1: 2, v2: 2, v3:10.
Web Interface
To display the configure SNMP Groups in the Web interface:
1. Click SNMP, Groups.
2. Specify the Privilege parameter.
3. Click Save.
Figure 2-16. The SNMP Groups Configuration screen.
Parameter Description
• Delete: Check to delete the entry. It will be deleted during the next save.
• Security Model: Indicates the security model that this entry should belong to. Possible security models are:
- v1: Reserved for SNMPv1.
- v2c: Reserved for SNMPv2c.
- usm: User-based Security Model (USM).
• Security Name: A string identifying the security name that this entry should belong to. The string length should be 1 to 32
characters, using ASCII characters from 33 to 126.
• Group Name: A string identifying the group name that this entry should belong to. The string length should be 1 to 32
characters, using ASCII characters from 33 to 126.
LPB2810A
To Next Page
Loading...
