724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 91
Chapter 3: Configuration
3.8.3 Statistics
This section describes the switch will display the MVR detail statistics after you had configured MVR on the switch. It provides the
detail MVR statistics information.
Web Interface
To display the MVR statistics information in the Web interface:
1. Click Configuration, MVR, Statistics.
2. To set the unit to auto-refresh the information, check the “Auto-refresh” box.
3. Click “Refresh“ to refresh the information.
4. Click “<< or >> “ to move to previous or next entry.
Figure 3-42: MVR Statistics information screen.
Parameter Description
• VLAN ID: The Multicast VLAN ID.
• V1 Reports Received: The number of V1 Reports received.
• V2 Reports Received: The number of V2 Reports received.
• V3 Reports Received: The number of V3 Reports received.
• V2 Leaves Received: The number of V2 Leaves received.
• Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.
• Icons, upper right of screen (Refresh, <<, >> ): Click them to refresh the MVR Group information manually; click the arrows
to navigate to the next page or entry.
LPB2810A
To Next Page
Loading...
Need help?
General