Page 105
724-746-5500 | blackbox.com
Chapter4:Configuration
4. Set the necessary parameters P1 and P2 (for example, CON Devices or CPU
Devices) for the selected macro command.
5. Confirm your inputs by pressing the <Enter> key and repeat the process for
further macro commands, if necessary.
Java-Tool
In the working area of menu “Definition > User,” select the user for which macros
have to be created and open the tab Macros.
Figure 4-41. Menu Definition - User
To create a macro for the selected user, proceed as follows:
1. Select the Key (1-16) for which a macro has to be created.
2. Select in the Function the commands that should be part of the macro. Open
the selection list by double-clicking on the empty fields.
3. Select the respective parameters for the macro functions (for example,
corresponding consoles and CPUs) in the P1 and P2 columns.
4. Confirm your inputs by pressing the “Apply” button.
To Next Page
Loading...
