Black Box ServSwitch DKM FX - Console Macros

Page 125
724-746-5500 | blackbox.com
Chapter฀4:฀Configuration
Java฀Tool
Select the respective user in the working area of the “CON Devices” menu for the
Favorites list and open the tab Favorites.
Figure 4-59. Menu Definition – CON Devices
To create a Favorites list for any console, proceed as follows:
1. Select the CPUs in the CPU Available list that should be added to the Favorites
list (CPU assigned). To mark more than one CPU device at the same time, press
the <Ctrl> key.
2. Press the“ >” button to move the marked CPU devices to the Favorites list. If
you press the “>>’ button, the first eight CPU devices from the CPU Available
list will be moved to the Favorites list (CPU assigned).
3. To change the order of marked CPU devices within the Favorites list, press the
<+> and <-> keys.
4. To remove marked CPU devices from the Favorites list, press the “<” button. To
remove all CPU devices from the Favorites list, press the “<<” button.
4.8.5 Console Macros
In this menu, you can create macro commands for switching, disconnection, or
user administration. The macro commands are created for each console separately.