Black Box ServSwitch DKM FX - Control Via OSD

Page 61
724-746-5500 | blackbox.com
Chapter฀4:฀Configuration
4.2.1฀Control฀via฀OSD
Figure 4-1. OSD icon.
Via OSD (on-screen display), you set the configuration of the ServSwitch DKM FX
operating system. The settings of the Configuration menu are described in this
chapter. All other menus are described in later chapters.
You can enter the OSD of the ServSwitch DKM FX:
•฀via฀keyboard฀connected฀to฀the฀CPU฀board
•฀via฀keyboard฀connected฀to฀a฀CON฀unit฀of฀an฀extender
Entering฀OSD
1. Start Command Mode with the hotkey.
2. Press <o> to open OSD. You will see a list of all available CPUs as a start menu.
3. Press <Esc> to enter the main menu.
Leaving฀OSD
•฀฀Press฀<Shift>฀+฀<Esc>฀simultaneously.฀The฀OSD฀will฀close฀without฀any฀further฀
changes and the currently active CPU connection will display.