Page 148
724-746-5500 | blackbox.com
Chapter 5: Operation
NOTE: The selected main/sub matrix mode is permanently activated until another
mode is manually activated. This means that if you select <s> for example,
all prospective commands will be sent to the sub matrix, but not if the
Command Mode is left in the meantime.
5.2KVMSwitching
To switch using the ServSwitch DKM FX, use OSD:
Figure 5-1. OSD icon.
OSD
Select “Switch” in the main menu.
Figure 5-2. Menu Switch screen.
To Next Page
Loading...
