Black Box ServSwitch DKM FX - Keyboard Control

Page 63
724-746-5500 | blackbox.com
Chapter฀4:฀Configuration
Keyboard control
You can select between the following keyboard commands:
Table 4-3. Keyboard commands.
Function
Keyboard
command
Left cursor—only within an input field or a switching screen <Cursor-Left>
Right cursor—only within an input field or a switching screen <Cursor-Right>
•฀In฀input฀fields:฀Line฀up฀(with฀wrap-around)
•฀In฀menus:฀Line฀up฀(without฀wrap-around)
<Cursor-Up>
•฀In฀input฀fields:฀Line฀down฀(with฀wrap-around)
•฀In฀menus:฀Line฀down฀(without฀wrap-around)
<Cursor-Down>
Previous page in menus with more than one page <Page-Up>
Next page in menus with more than one page <Page-Down>
Next input field <Tab>
Previous input field <Left-Shift> + <Tab>
Next option in selection fields <+>
Previous option in selection fields <->
Switching in selection fields between two conditions,
for example, between ON/OFF or Y(Yes)/N(No)
<Space>
•฀In฀menus฀with฀input฀fields:฀Save฀data
•฀In฀menus:฀Select฀menu฀item
<Enter>
•฀In฀menus฀with฀input฀fields:฀Cancel฀data
•฀In฀menus฀with฀selection฀fields:฀Go฀back฀to฀the฀superior฀menu
<Esc>