Black Box ServSwitch DKM FX - Saving and Loading of Configurations; Active Configuration; Saving of Configurations (Internal)

Page 129
724-746-5500 | blackbox.com
Chapter฀4:฀Configuration
•฀฀฀Right-click฀on฀the฀macro฀list฀to฀copy฀macros฀of฀the฀selected฀key฀into฀the฀cache฀
by using the “Copy Key Macros” function. You can paste the macros from the
cache into a key by using the “Paste Key Macros” function and you can reset
all macros of the selected key by using the “Reset Key Macros” function.
4.9฀Saving฀and฀Loading฀Configurations
You can set the following configurations:
4.9.1฀Active฀Configuration
Use the OSD button to access the menu:
Figure 4-63. OSD button.
Select “Configuration > Save” in the main menu.
By selecting this menu item, the active configuration of the matrix is saved to the
permanent matrix memory. By default, the last configuration that has been saved
in this way will be restored after the matrix restarts.
NOTE: Changing or saving configurations blocks the matrix memory and freezes
all OSD menus for a few seconds. The switching connections are not
affected by this freeze.
If you select “Auto Save” within the system settings, it will automatically save the
configuration periodically.
4.9.2฀Saving฀of฀Configurations฀(Internal)
In this menu, the current matrix configuration to predefined storage locations is
saved. However, it does not replace configuration buffering.
You can access the menu via OSD or Java:
Figure 4-64. OSD and Java icons.
In Active, the name and detailed information of the current configuration are
shown. This configuration can be saved now.