Black Box ServSwitch DKM FX - Page 128

Page 128
724-746-5500 | blackbox.com
Chapter฀4:฀Configuration
Java฀Tool
In the working area of the “Definition > CON Devices” menu, select the console
for which a console macro has to be created and open the “Macros” tab.
Figure 4-62. Menu Definition - CON Devices
To create a macro for the selected console, proceed as follows:
1. Select the number key (1-16) for which a macro has to be created.
2. In the “Function” column, select the commands that should be part of the
macro. Open the selection list by double-clicking on the empty fields.
3. In the P1 and P2 columns, select the respective parameters for the macro
functions (for example, corresponding consoles and CPUs).
4. To confirm your inputs, press the “Apply” button.
For an efficient macro configuration, the following context functions are available:
•฀฀Right-click฀on฀the฀“Macros”฀tab฀to฀assign฀macros฀to฀other฀consoles฀by฀using฀the฀
“Assign Macros to ...” function. Copy macros from other consoles by using the
“Copy Macros from ....” section.