Black Box ServSwitch DKM FX - Supported Peripherals; Connector Pinouts; CPU Board

Page 15
724-746-5500 | blackbox.com
Chapter฀1:฀Specifications
1.3฀Supported฀Peripherals
You can use the KVM extenders described in Tables 1-7 and 1-8 with the
ServSwitch DKM FX:
Table 1-7. KVM extender with CATx connection.
Product฀CodeDescription
AC X1T-11- C KVM CPU unit, single-head, 2x USB HID
ACX1R-11-C KVM CON unit, single-head, 2x USB HID
AC X1T-11V- C KVM CPU unit, single-head, DVI-I input (VGA), 2x USB HID
ACX1R-11V-C KVM CON unit, single-head, IR receiver, 2x USB HID
Table 1-8. KVM extender with fiber (single-mode) connection.
Product฀CodeDescription
AC X1T-11-SM KVM CPU unit, single-head, 2x USB HID
ACX1R-11-SM KVM CON unit, single-head, 2x USB HID
AC X1T-11V-SM KVM CPU unit, single-head, DVI-I input (VGA), 2x USB HID
ACX1R-11V-SM KVM CON unit, single-head, IR receiver, 2x USB HID
1.4฀Connector฀Pinouts
1.4.1฀CPU฀Board
Figure 1-1. DVI-D single-link connector.