Black Box ServSwitch DKM FX - Example Applications

Page 54
724-746-5500 | blackbox.com
Chapter 3: Installation
7. If you have a video matrix, connect the video source directly to the ServSwitch
DKM FX by using the interconnect cables (coax, fiber).
8. Connect the 5-VDC power supply units to the CPU units.
9. Start the system.
3.2 Example Applications
The ServSwitch DKM FX supports a flexible configuration of your system
environment:
For example, part of the ServSwitch DKM FX can be configured as a single-head
workstation, part as dual-head, or quad-head, or even as a video ServSwitch DKM
FX. You can also configure KVM and USB 2.0.
In addition to the access via OSD by the keyboard connected to the CPU board or
an extender CON unit, you have the following access options:
•฀via฀Java฀Tool
•฀via฀serial฀interface
A connection to common media controls is possible, too.
Sections 3.2.1 through 3.2.4 describe typical installations of the ServSwitch DKM
FX.