Black Box ServSwitch DKM FX - Console Settings; CON Devices

Page 114
724-746-5500 | blackbox.com
Chapter฀4:฀Configuration
4.8฀Console฀Settings
You can perform the following console settings:
4.8.1฀CON฀Devices
New CON devices are created in this menu including access rights and assignment
to extenders.
You can access the menu via OSD or Java:
Figure 4-48. OSD and Java icons.
You can select between the following settings:
Table 4-35. CON devices settings.
Field Selection Description
ID Text ID of the CON unit (see Section 4.4.2)
Name Text Name of the CON device
Virtual
device
Activated Create new CON device as a virtual one
Deactivated Function not active (default)
Allow login
Activated Allow user login at this CON device
Deactivated Function not active
Force login
Activated Force user login at this CON device
Deactivated Function not active
LOS frame
Activated
If there is a loss of connection, the last picture shown will still be displayed
and is surrounded by an orange frame.
If you switch to a CPU that does not have a video signal, a blank screen
will appear surrounded by an orange frame.
Deactivated Function not active (default)