Black Box ServSwitch DKM FX - Loading of Configurations (External)

Page 134
724-746-5500 | blackbox.com
Chapter฀4:฀Configuration
Figure 4-71. Menu File—Save As screen.
4.9.5฀Loading฀of฀Configurations฀(External)
Externally saved configurations are opened and activated in this menu.
You have the following possibilities to load configurations from files:
1. Select “File > Open…” during off-line mode and select the storage location of
the configuration file that has to be opened.
2. Open the configuration by pressing the “Open” button.
3. Select “File > Upload to…” in the menu bar to transfer the opened
configuration to the matrix. Enter the necessary parameters.
4. Select “Matrix > Connect” in the menu bar to make a connection between the
matrix and the Java tool. Enter the necessary parameters.
5. Select “Administration > Activate Configuration” and select the configuration
to be activated.
6. Confirm the process with the “Activate” button.
The opened configuration is activated now and can be used.