Black Box ServSwitch DKM FX - Snmp

Page 51
724-746-5500 | blackbox.com
Chapter 2: Overview
The following filter options are available:
Table 2-36. Filter options.
Option Description
Date Messages of a defined range will be filtered.
Facility Messages of a defined facility will be filtered.
Severity Messages of a defined severity will be filtered.
Host Messages of a defined host will be filtered.
Message Messages with defined text parts will be filtered.
NOTE: Filter options are not valid within the locally stored log files.
Recording฀Function
All messages shown in the Syslog are equipped with various recording functions.
•฀฀To฀store฀the฀messages฀shown฀in฀the฀Syslog฀(filtered฀or฀unfiltered),฀press฀the฀
“Save trace” button. The messages will be stored in a .txt file.
•฀To฀remove฀the฀messages฀shown฀in฀the฀Syslog,฀press฀the฀“Clear฀trace”฀button.
•฀฀To฀stop฀recording฀the฀messages,฀press฀the฀“Pause”฀button.฀To฀continue฀
recording, press the button again.
2.9฀SNMP
Use SNMP to monitor all function-critical and safety-critical parts of the matrix
and to query their status. This function complies with the RFC 1157 standard.
NOTE: During SNMP monitoring, we strongly recommend that you use a
dedicated network to ensure access security.
You can access the menu via OSD or Java:
Figure 2-38. OSD and Java icons.
OSD
To activate SNMP via OSD, follow these steps:
1. Select “Configuration > Network” in the main menu.